EP waveform sidewall rubber conveyor belt(price)

wide range materials can be handled, 1less space requirement, 2no transfer point, 3low maintenance 4 big capacity

1,The requirements of the baseband:

Corrugated sidewall conveyor belt requires a certain degree of tensile strength and wear resistance. Such as the corrugated sidewall conveyor belt of the remaining empty side, its tape vertical request soft and horizontal requires a certain rigidity in order to meet the requirements of the angle bend. Corrugated sidewall conveyor belt produced by using a special structure which is the lateral rigidity of the baseband, solved the large-sized conveyor belt occurred the phenomenon of collapse during the return trip. 

2,Base Belt Structure:

Four Parts: Top cover rubber,bottom cover rubber, Reinforced core,Cross rigid.

Thickness of top cover rubber:3-6 (mm)

Thickness of bottom cover rubber: 1.5-4.5 (mm).

Belt core: Nylon,EP,cotton or steel cord.

The width is the same as normal belt,The standard meets with GB/T7984 

3, Diaphragm

Cleat types:T,TS,C,TC and TCS

The cleat is made of enforced fabric,solid,anti-shock to avoid distortion.

“TS”and “TCS”cleats are normally used up to 40°,“TC”and “TCS”are normally used from 40°to 90°.

Sidewall,cleat and base belt are joined through hot vulcanization.

Cleats and sidewalls are joined through bolt to prevent leakage of material.

 4,USED

Widely used in coal,minging,harbour,metallurgy,power,chemical,etc field for conveying materials.

5,CORRUGATED SIDEWALL CONVEYOR BELT SPECIFICATION

 

 6, Baseband:

The requirements of the baseband: The requirements of the baseband: Corrugated sidewall conveyor belt requires a certain degree of tensile strength and wear resistance. Such as the corrugated sidewall conveyor belt of the remaining empty side, its tape vertical request soft and horizontal requires a certain rigidity in order to meet the requirements of the angle bend. Corrugated sidewall conveyor belt produced by using a special structure which is the lateral rigidity of the baseband, solved the large-sized conveyor belt occurred the phenomenon of collapse during the return trip.  Base Belt Structure: Four Parts: Top cover rubber,bottom cover rubber, Reinforced core,Cross rigid. Thickness of top cover rubber:3-6 (mm) Thickness of bottom cover rubber: 1.5-4.5 (mm). Belt core: Nylon,EP,cotton or steel cord. The width is the same as normal belt,The standard meets with GB/T7984  7, Corrugated wall We manufacture the corrugated sidewall with tearing resistant cotton fabic to reinforce the belt tearing for long life. 8, Diaphragm: Cleat types:T,TS,C,TC and TCS The cleat is made of enforced fabric,solid,anti-shock to avoid distortion. “TS”and “TCS”cleats are normally used up to 40°,“TC”and “TCS”are normally used from 40°to 90°. Sidewall,cleat and base belt are joined through hot vulcanization. Cleats and sidewalls are joined through bolt to prevent leakage of material. 9, Corrugated wall and diaphragm combination table 10, Corrugated wall with a number of combinations